Two Alnico blade magnets provide Humbucker Punch in a single coil sized pickup! These 4 wire pickups have a total DC resistance of 11.2K, and can be coil split for 5.6K each. Mount one in the bridge position for HSS configuration, or mount two or three for an arsenal of tone and power! Black covers, screws and springs included.

Set of three: "Alnico 5" magnets provide full vintage tone with DC resistances of 6K, 6.4K and 6.7K on the neck, middle and bridge pickups respectively. Middle pickup wound in reverse direction for hum canceling. Staggered pole pieces and white covers. Screws and springs included.

Set of three: "Alnico 5" magnets wound to produce piercing highs and mellow midrange tones. DC resistance is 4.5K on all three pickups. Middle pickup wound in reverse direction for hum canceling. Concealed poles under Black covers. Screws and springs included.

Set of three: The classic vintage tone of these pickups starts with Alnico V magnets wound for DC resistances of 5.8K, 5.6K and 6.2K on the neck, middle and bridge pickups respectively. Middle pickup wound in reverse direction for hum canceling. Staggered pole pieces and white covers. Screws and springs included.

Set of three: High Output pickups with Alnico V magnets wound for DC resistances of 5.8K, 5.7K and 6.1K on the neck, middle and bridge pickups respectively. Middle pickup wound in reverse direction for hum canceling. Staggered pole pieces and Black covers. Screws and springs included.

Set of Two: The Ceramic magnets offer crystal clear highs, while High DC resistance of 14.2K on the bridge pickup creates a rich, warm tone. A great combination. Neck pickup resistance is 10.8K. Four wires each for coil-splitting if desired. White covers, pickup height screws and springs included. Mounting ring screws must be ordered seperately.

Set of Two: The Ceramic magnets offer crystal clear highs, while High DC resistance creates a rich, warm tone. A great combination. Neck pickup resistance is 7.1K, Bridge is 14.2K. Two wires, no center tap. Black covers, pickup height screws and springs included. Mounting ring screws must be ordered seperately.

9/16" long x 3/32" diameter countersunk Phillips head screws in a variety of finishes for Humbucker pickup mounting rings. Order 4 for each pickup.

Black, 9/16" long x 3/32" diameter countersunk Phillips head screw for Humbucker pickup mounting rings. Order 4 for each pickup.

Gold, 9/16" long x 3/32" diameter countersunk Phillips head screw for Humbucker pickup mounting rings. Order 4 for each pickup.